Mold is a common problem that many homeowners face. Mold can damage walls and produce unpleasant odors that lead to respiratory problems. Sometimes, the mold is hidden inside walls or in hard-to-reach places. Removing mold can be difficult because it may not be visible and you have to find all the source areas of mold growth for complete removal. Prevention is key to keeping your home free from mold. Here are some tips on how to remove garage mold in three easy steps!
Tips to Prevent Mold Growth
Mold needs three things to grow: moisture, oxygen, and a food source. If you can keep these three things under control, then you can prevent mold from growing in your garage.
To remove mold from your garage, first check for leaks or other sources of moisture. Fix any leaky pipes, windows, or doors that allow outside air to come into the house and increase the humidity levels. This will help prevent any further growth of mold.
If you have an unfinished basement, make sure there is proper ventilation so that the floor doesn’t stay too damp for too long.
Dehumidifiers are another way to help with prevention because they inhibit mold growth by removing humidity from the air. Setting up dehumidifiers will also keep your home dryer during humid months which reduces any chance of mold growth on exterior walls.
Lastly, some people recommend using borax as an alternative to bleach when tackling tough stains like dried paint or dirt on concrete surfaces since it is less likely to irritate allergies and has anti-bacterial properties (which also fights mold).
How to Remove Garage Mold
Mold can be a problem in garages and it’s important to know how to remove this type of mold.
Step 1: Find the source
The first step is to identify the source of the mold. Mold thrives on moisture and may be hidden in walls, under vehicles, or inside storage boxes that collect water. Once you find the source of the problem, you can take preventive measures by eliminating sources of moisture or installing a dehumidifier.
In some cases, professionals may need to identify the source if it is not readily apparent. This will help ensure there are no other areas where mold could grow.
Step 2: Neutralize remaining mold
Once you have found and removed all sources of moist within your garage, there may still be traces of mold remaining on surfaces like concrete floors. Use a solution containing bleach for this step as it will kill any remaining traces of mold without harming nearby surfaces. You want to saturate all surfaces with bleach so that there is no chance for any areas where mold could grow back. In addition, use a detergent solution to clean off hard-to-reach places such as stains from oil leaks or bird droppings from your car’s windshield.
Step 3: Prevent future outbreaks
Step. A: Get rid of excess moisture
Water is a key component to mold growth. It provides a foundation for the roots of the mold to grow and thrive. Mold needs water, air and nutrients for growth. This means that if you can reduce or eliminate one or more of these components, you can slow down the mold growth process.
One way to get rid of excess moisture is by using a dehumidifier in your home. This will reduce the number of times you need to use your dryer and lower your monthly energy bill while preventing mold from growing in your home.
Also, make sure that all leaks are taken care of promptly and that spills are cleaned up within 24 hours.
Step B: Eliminate the mold
There are many ways to eliminate mold. One way is by using a commercial product like bleach or ammonia. Many people choose to use bleach because it will work in wet or dry conditions. Bleach can disinfect porous items, like wood and plastic. But be careful not to use too much!
Step C: Restore the area with paint
There may be exposed areas of the wall that were not covered by a paint layer. These exposed areas should be repainted to seal off any moisture that may have entered before you started your mold removal process.
With these three easy steps, you will successfully remove the mold from your garage and keep it from coming back!
How can you prevent Garage Mold in the future?
The best way to prevent garage mold is to make sure that moisture never becomes an issue.
- Keep an eye out for any water leaks in your garage.
- See that the garage door seal on the bottom of the garage door seals completely so that rain can’t enter under it.
- Make sure gutters and downspouts aren’t clogged and water doesn’t overflow them.
- Consider installing an exhaust fan in the garage to eliminate humidity buildup during warmer seasons of the year.
- Every once in a while leave the light on for 24 hours. The electricity for one or two light bulbs will cost way less than a mold remediation project.
Garage Mold: What to Do?
You can call “Bakken Mold Squad” any time, day or night, at 7012131140 and talk to our mold removal experts. They will be able to answer your questions, and if you would like, schedule a time to come to your home and inspect your garage mold problem. Our certified specialists will come to your home to inspect any mold issue.